AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Lemoore
Furnace repair in Lemoore typically costs between $150 and $700, and most jobs can be diagnosed and completed on the first visit. The single biggest factor on that price is what actually failed: an ignitor replacement sits at the low end, a heat exchanger job at the high end, and a blower motor somewhere in the middle. We schedule furnace repair calls in Lemoore every weekday, with a live person answering the phone 24/7 at (559) 354-6878. When a furnace quits on a December morning and your house is dropping to 55 degrees, you want a diagnosis that day, not a callback queue.
Lemoore gets genuinely cold in winter, especially on clear Valley nights when the temperature bottoms out below freezing. Homes here were built for the summer first. Many of them have furnaces installed in the 1970s and 1980s, a fair number of them original to the house. We know the streets, we know the housing stock, and we know what tends to fail first in this climate. You’ll get a written price before any work starts, and the technician who shows up is the same person we told you about by name and photo before the visit.
Why Brandt HVAC Co Fresno Is Lemoore’s Preferred Furnace Repair Company
Homeowners in Lemoore choose us for something that goes beyond price: they know exactly who is walking through the door. Every Brandt HVAC technician is background-checked and identity-verified under the Threshold Verified standard. Before a visit, you receive the technician’s name and photo. At the door, they show a photo ID badge. If someone shows up who you were not told to expect, that visit is on us and we make it right. That matters when you’re home alone, when your kids are home from school, when you’re an older homeowner who has heard too many stories about strangers in the house.
Our Furnace Repair team responds to Lemoore calls from the Fresno, Central Valley dispatch office, which means scheduling and parts are coordinated before a technician ever gets in the truck. We answer the phone live around the clock, nights and weekends included. No answering service, no automated tree, no “leave a message and we’ll call you back.” If your furnace fails at 2 a.m. and you call, a human picks up. That call leads to a written guarantee on every repair, covering parts and labor for a full year under the 365-Day Done Right Promise. If the repair fails within that year, we return at no charge. No argument.
Devin Marlowe leads the team at Brandt HVAC Co Fresno, and the standard he set applies to every Lemoore call: write the price before touching the unit, explain the repair in plain language, and leave the house warm and the customer certain about what happened. That is the whole job.
Styles & brands we work with
Furnace Tune Up in Lemoore
A Furnace Tune Up in Lemoore runs $80 – $200 and is the smartest pre-season money you can spend, especially before the first real cold snap. The job includes checking the flame sensor and ignition system, testing the gas valve operation, measuring the temperature rise across the heat exchanger, inspecting for cracks or corrosion, cleaning the burners, checking the blower motor amp draw, and verifying the flue and combustion air are clear. If anything is starting to fail, you hear about it while it is still a small repair instead of a midnight emergency.
Pre-Season Inspection
The best time to book a tune-up in Lemoore is October or early November, before the heating season actually starts. A furnace that ran fine all winter last year may have developed a slow issue over the summer: a dirty flame sensor, a failing capacitor, a gas valve that is sticking. Catching those in October costs less and avoids a lockout on the first cold night. A tune-up takes about an hour on a typical residential system.
Safety Check on Heat Exchanger
Older furnaces in Lemoore, the ones installed in mid-century homes, deserve a close look at the heat exchanger every year. A cracked heat exchanger leaks carbon monoxide into the supply air, and that is not a theoretical risk. It is a genuine, potentially fatal defect. Our tune-up includes a visual inspection and a combustion check. If we find a crack, we stop, show you, and write the repair price before proceeding.
Emergency Furnace Repair in Lemoore
Emergency Furnace Repair in Lemoore costs $150 – $700, same range as standard repair, because emergencies here are usually the same component failures happening at a bad time. The most common emergency call we get in Lemoore is a furnace that will not light on the first genuinely cold morning of the season, followed closely by a blower motor that seized or a limit switch that kept tripping. Cold weather is not a comfort problem in a California Valley house built with minimal insulation. It gets genuinely uncomfortable, and for older residents or families with small children, it becomes a health risk. That is why we answer the phone all night and dispatch to Lemoore seven days a week.
Through-the-Night Response
When you call at 3 a.m. with no heat, a live person takes the call and begins scheduling a technician for Lemoore that same morning. We do not collect an overtime surcharge for night or weekend calls. The price you are quoted is the price you pay, and it is written before any tool touches the furnace.
Same-Morning Diagnosis in Lemoore
Most emergency furnace calls in Lemoore are diagnosed same-day. The technician arrives with common parts on the truck: ignitors, flame sensors, capacitors, gas valves, pressure switches, and thermocouples. That means a high percentage of emergency repairs are finished in one visit because the part that failed is already on hand, not ordered and shipped from somewhere else.
Trusted Brands We Service in Lemoore
We service all major residential furnace brands and see a lot of Lennox, Goodman, Rheem, and York in Lemoore. Parts for these systems are stocked locally and on the truck, which cuts down the second-visit problem that local homeowners have every right to be tired of. A Carrier furnace from the 1990s is also a regular sight in Lemoore houses, and we carry the replacement parts those older units need, from hot surface ignitors to blower motor modules. Being brand-agnostic means we recommend and install the part your system actually needs, not the one that earns us the highest margin. That is how certainty pricing works: you know what you are paying for and why.
Common Furnace Repair Problems We See in Lemoore Homes
- Like-for-like swaps into original undersized ductwork. The original ducts in many mid-century Lemoore homes were designed for a smaller furnace and a different airflow standard. When a newer, higher-efficiency furnace gets connected to those same ducts, the blower works against too much static pressure, and the high limit switch starts tripping on cold nights. Over time that heat stress shortens the heat exchanger’s life. We measure static pressure before recommending any furnace repair or replacement, and we tell you what we find.
- Single-zone systems on unbalanced floor plans. The classic Lemoore home is a ranch built in the 1950s or 1960s, long and low, with bedrooms at one end and the living room at the other. A single furnace in the hall closet cannot heat both ends evenly. The far bedrooms stay cold, so the thermostat gets cranked up, the furnace overworks, and the heat exchanger fatigues. The fix is not always a bigger furnace. Sometimes it is airflow correction, and we’ll tell you which one you actually need.
- Electrical panels that can’t support the blower. Many older Lemoore homes still have original 100-amp or even 60-amp panels. Modern furnaces with ECM blower motors draw different current than the old PSC motors, and outdated breakers can nuisance trip during cold snaps. Before we install or repair a furnace in an older Lemoore house, we check the electrical service and the dedicated circuit. If the panel needs attention, we say so up front, in writing.
- Frozen coils and tripped breakers at the first 100°F day. Wait, wrong season? No, not really. Lemoore’s HVAC systems work hardest in summer, and a furnace blower that limped through the cooling season sometimes fails the moment the heating season starts. The blower motor that pulled high amps in August may not make it to Thanksgiving. If your air conditioner struggled this past summer, schedule a furnace tune-up before winter to catch the blower issue before the cold does.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Lemoore, CA
Furnace repair pricing in Lemoore is straightforward. Here is the range for the two main jobs on this page.
| Service | Typical Lemoore Range |
|---|---|
| Furnace Tune Up | $80 – $200 |
| Emergency Furnace Repair | $150 – $700 |
Within that repair range, an ignitor replacement typically runs $150 – $300, a flame sensor cleaning or replacement $150 – $300, a blower motor $400 – $700, and a heat exchanger repair or replacement at the top of the range, sometimes exceeding it depending on the furnace model and age. What determines the final number is the part, the labor time, and whether anything else got damaged as a result of the original failure. You get a written, line-item price before work begins. Every time. That is not a promotional offer; it is how we operate on every repair call in Lemoore. Call (559) 354-6878 for a free estimate.
We Also Serve Cities Near Lemoore
If you live in Lemoore or the surrounding towns of Hanford, Kingsburg, Selma, or Fowler, our technicians cover your area with the same upfront pricing and named-technician standard. The drive time is short enough that response times stay tight across the whole south Fresno County basin. You get the same written guarantee and the same live-answer phone line, whether the call comes from a Lemoore ranch off Highway 41 or a newer subdivision in Hanford.
Serving Lemoore, CA - Our Local Coverage Area
We’re based in the Lemoore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Lemoore
Short-cycling in a Lemoore furnace is usually caused by the high limit switch tripping, which means the furnace is overheating because it cannot move enough air. The most common local causes are leaky original ductwork, a dirty or restricted return, a failing blower motor, or simply a furnace that has been running hard through a long cooling season and is now exhausted. On a cold morning, the furnace fires, overheats, shuts off, cools down, and fires again. The fix starts with a static pressure check and a blower amp draw test. Call (559) 354-6878 and we’ll diagnose it in one visit.
Yes, directly. An R-22 system means your furnace blower and coil are older, and any furnace repair has to account for that. West of Highway 41 in Lemoore, many homes still run original R-22 condensers paired with furnaces from the same era. The blower motor and control board ages with the system, and if the coil has been leaking or the refrigerant charge is off, the blower has been working harder than it should. That wear shows up in the heating season as a failed blower, a tripping limit switch, or a heat exchanger that was overheated all summer. We service both components together, so the furnace repair works with the cooling side, not against it.
You need both, and a proper tune-up includes the heat exchanger inspection. A Carrier furnace from the 1990s is near or past its expected service life, depending on how hard it has been run in Lemoore’s summer heat. The heat exchanger is the part that separates combustion gases from your breathing air, and after 25 or more years, cracks are a real possibility. During a furnace tune-up in Lemoore, we visually inspect the heat exchanger, run a combustion check, and look for signs of stress around the seams and junctions. If it is intact, the tune-up is enough. If it is cracked, the unit should be considered for replacement, and we’ll give you that written price without pressure.
This is a balancing and ductwork problem, not a furnace problem, but it still lands on our repair list because the furnace gets blamed for it. In Lemoore homes with single-zone systems and original ductwork, airflow rarely reaches the ends of the house. The warm air takes the path of least resistance, which is usually the registers closest to the furnace. Distant bedrooms get whatever is left. Pushing the thermostat higher does not fix the imbalance; it just overworks the furnace and raises your gas bill. We measure airflow at each register, inspect the duct runs, and show you what correction is possible, whether it is damper adjustment, return air sealing, or a duct repair.
Yes. We repair all major residential furnace brands in Lemoore, including Trane, Lennox, Goodman, Rheem, York, Carrier, Bryant, Daikin, and American Standard. Parts for the most common brands are stocked on our trucks because we know how often they fail in this climate. You do not pay a brand penalty and we do not steer you toward a replacement just because we do not stock the part for your existing unit. If it can be repaired, we repair it. Call (559) 354-6878 and tell us the brand and model; we’ll bring the right parts on the first visit.
Call Brandt HVAC Co Fresno for Furnace Repair in Lemoore
When your furnace goes down in Lemoore, call (559) 354-6878. You’ll speak to a live person, not a recording, no matter what time it is. You’ll get a technician whose name and photo you already have, who arrives in uniform with a photo ID badge, and who writes the price before doing the work. Every repair carries a 365-Day Done Right Promise: if it fails within a year, the return visit is free. We keep Lemoore warm, and we do it without making you wonder who is at the door. That is the Brandt standard, and it is the only one we work under.
Written by Devin Marlowe, Owner at Brandt HVAC Co Fresno.