AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Selma
Furnace repair in Selma typically runs $150 – $700, and most jobs are completed the same day we arrive. If your heat quit in the middle of a foggy Central Valley night, call us at (559) 354-6878 and a live person answers, not a phone tree. We know the older homes here. We know the gravity furnaces, the pier-and-beam crawl spaces, and the dust that comes off the vineyards and orchards around Kingsburg Road and Floral Avenue. If you live in Selma, we can usually have a technician at your door within hours, with a written price before any work starts.
Why Brandt HVAC Co Fresno Is Selma’s Preferred Furnace Repair Company
Our Furnace Repair team has walked through more Selma bungalows and ranch homes than most companies will see in a decade. That matters when your home was built during the raisin boom and nothing about the ductwork is standard. Before any technician arrives, you get their name and photo. At the door, they show a photo ID badge and introduce themselves. That’s the Threshold Verified standard we built our name on, and it’s why homeowners who are home alone, or who have young kids, or who just want to know exactly who’s walking through the door, call us first.
We’re part of the Threshold Group family, established in 2003. Each location is independently owned and operated, led here by Devin Marlowe. Scheduling and dispatch run from our Fresno office, but the crews serving Selma live and work in the surrounding communities. They know that an east-side house near the railroad tracks is a different animal than a newer subdivision off Floral. That local knowledge is what lets us give you a straight answer instead of a guess.
Styles & brands we work with
Furnace Maintenance in Selma
Furnace Maintenance in Selma is not optional seasoning. The agricultural dust that rolls across the Valley from the raisin vineyards and stone fruit orchards gets pulled into return ducts and coats burners, blower wheels, and flame sensors. A furnace in Selma that skips tune-ups for two or three years will struggle to light, short-cycle, or trip the high-limit switch. A tune-up here runs $80 – $200 and includes cleaning the flame sensor, checking gas pressure, testing the heat exchanger for cracks, and measuring airflow against static pressure, not just swapping a filter.
What a Selma Tune-Up Actually Includes
We pull the blower assembly and vacuum the wheel. We check the ignitor’s resistance, test the gas valve, and run a combustion analysis. When the job is done you get a written report of what we found and what we did, not a sales pitch. Our technicians are not paid on what they sell, so a tune-up is a tune-up.
When Selma Homeowners Should Schedule It
Before the first cold snap in November, ideally. The first firing of the season burns off months of dust and can smell alarming, but a clean furnace handles it without tripping. If you missed fall, schedule it now. A neglected furnace costs more to run and fails at the worst time.
Heat Pump Repair in Selma
Heat Pump Repair in Selma comes with a specific wrinkle: those cool, foggy winter mornings ask a lot of a system that spent all summer cooling. The reversing valve that switches the system between cooling and heating is the most common failure we see. A heat pump that won’t switch over, or that blows cold air in heat mode, or that ices over in the 40-degree fog, usually needs a reversing valve job, a defrost board, or a refrigerant check. Repair work on heat pumps in Selma falls in that same $150 – $700 range, depending on what failed.
Foggy Weather and Heat Pump Defrost
The fog lingers here in a way it doesn’t in Fresno or Clovis. High humidity at just above freezing means the outdoor coil forms frost fast. A healthy defrost cycle clears it. A failed defrost board lets ice build until the unit locks out entirely. Our techs check the defrost sensor and board on every seasonal call because Selma winters reliably expose that weak point.
When Heat Pump Repair Beats Replacement
If the compressor is sound and the coil isn’t leaking, repair usually makes sense. We write down the diagnosis, the exact repair cost, and what the repair covers before any work begins. You decide with real numbers in front of you. If the repair fails within 365 days, the second visit is free. That’s our 365-Day Done Right Promise.
Trusted Brands We Service in Selma
We stock parts for the furnaces most common in Selma homes: Bryant, American Standard, Carrier, Trane, and the rest of the major residential lines. Because so many houses here run mid-efficiency Bryant and Carrier units from the 1990s and 2000s, we keep ignitors, flame sensors, gas valves, and blower motors on our trucks. That means fewer second visits and faster repairs when it’s cold. No brand is too old or too obscure, but if we don’t have the part, we can usually source it same day from our Fresno parts partners.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Selma Homes
- A new furnace tripping the high-limit switch on old ductwork. Selma’s pre-1960s homes often have undersized ducts sized for a gravity system, not a modern forced-air furnace. A swap without measuring static pressure leaves airflow too low and the new furnace overheats constantly.
- Electrical panels from the raisin boom era that can’t handle a modern furnace’s draw. A 60-amp panel that was fine for a floor furnace chokes when a new high-efficiency blower kicks on. The main breaker trips on the first cold night, and it’s not the furnace’s fault.
- Duct leaks in pier-and-beam crawl spaces. Those old crawl spaces under Selma bungalows are dusty and open. Leaky ducts heat the crawl space, not the bedrooms. Gas bills climb and the house stays cold.
- Burning-dust smell on first fire-up. Months of Valley dust settle on the heat exchanger over summer. The first ignition burns it off, which is normal, but if the smell persists or you see soot, the heat exchanger may be cracked and needs attention immediately.
Pricing for Furnace Repair in Selma, CA
Here are the real numbers for Selma, not vague ranges we hope you’ll forget. A standard ignitor replacement runs $150 – $300. A gas valve replacement lands between $250 – $500. A blower motor runs $350 – $650. A full furnace repair job, worst case, hits $700. Tune-ups run $80 – $200. We write the price down before work starts, on every job, no exceptions. No hourly billing surprises, no parts marked up after the fact. Call (559) 354-6878 and we’ll give you an exact quote.
| Service | Typical Selma Cost |
|---|---|
| Furnace Repair | $150 – $700 |
| Tune-Up | $80 – $200 |
We Also Serve Cities Near Selma
From Selma, our crews cover the surrounding Central Valley towns: Fowler, Parlier, Kingsburg, and Reedley. Same Threshold Verified technicians, same written pricing, same 24/7 live phone answer. If you’re just outside Selma, call and we’ll let you know exactly when we can be there.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Selma
Yes. The dust from surrounding vineyards, orchards, and field roads pulls into return air and coats every internal component. Filters clog faster than in cleaner-weather cities, and that restriction stresses the blower motor and heat exchanger. In Selma we recommend checking filters monthly during harvest months, not quarterly. A tune-up every fall is the cheapest insurance you can buy.
Sometimes, but doing a like-for-like swap without checking static pressure is a common Selma mistake. Many pre-1960s homes here have original gravity furnaces with ducts never designed for a modern forced-air blower. The new furnace overheats, trips the limit switch, and cycles endlessly. We measure the actual airflow and tell you honestly whether the ducts can handle the upgrade before any work is quoted.
Usually not. Selma’s raisin-boom-era homes often have 60-amp or 100-amp panels that were fine for a floor furnace and a few lights. A modern furnace blower draws more current, and if the panel or the wiring is undersized, the main breaker trips. We’ll diagnose whether the furnace’s amp draw is within spec and advise if an electrician needs to upgrade the panel before the furnace can safely operate. Call (559) 354-6878 and we’ll tell you what’s actually going on.
That’s months of Selma Valley dust burning off the heat exchanger on the first fire-up of the season. It should clear within a few hours. If the smell persists, if you smell gas or see soot around the register boots, shut the furnace down and call us. A cracked heat exchanger leaks carbon monoxide, which is a life safety issue, not a maintenance annoyance.
A properly sized cold-climate heat pump will absolutely heat a Selma home through the fog and the 30-something-degree nights. The catch is the house itself. Older Selma homes with leaky ducts and thin insulation lose heat faster than a heat pump can replace it efficiently. We run a load calculation and look at the ducts before recommending a heat pump. If the home needs sealing or duct work first, we’ll tell you that straight.
If your furnace is down and the house is cold, don’t guess. Call (559) 354-6878. A live person answers, day or night. We’ll send a named, background-checked technician to your Selma home with a written price before any work begins. If it’s not done right, we make it right, free, for 365 days. That’s the deal, in writing, every time.
Written by Devin Marlowe, Owner at Brandt HVAC Co Fresno, serving Selma and the surrounding Central Valley.